Arboriculture Combination Course – SEP126

Written by Michele Holmes Fryett on . Posted in Chainsaw, Climbing, Content, Course availability

SEP126 – Tues 01 Sept – Sat 26 September 2026

This comprehensive course covers everything needed to begin a new career as a tree surgeon and is held over 4-weeks.  Please see the course outline link below for further details of this course.

To book one of our courses we require a completed booking form, and a deposit to secure the place. The balance of the course is due 2 weeks prior to the course start date. Please complete the online enquiry form below to start this process or call the office for further information.

Course Outline

Course Title: Arboriculture Combination Course – SEP126
Start Date: Mon 01 September 2026 
End Date: Sat 26 September 2026
Location: Kingswood Training Centre
Places: 4
Places Remaining: 4 places 

COURSE TOTAL:  £3500.00 per candidate including VAT & NPTC Assessments

    Your Name (required)

    Company

    Email (required)

    Phone No.

    Address

    Postcode/Zip

    Comment

    Keep me up-to-date with news and offers from Kingswood Training Services

    captcha

    CS30/31 – 5-day Combined Chainsaw Maint, Cross Cutting and Felling up to 380mm course + Assess – 100826

    Written by Michele Holmes Fryett on . Posted in Chainsaw, Content, Course availability

    Mon 10 Aug – Fri 14 Aug 2026, Assessment date: Sat 15 August OR Mon 17 August 2026

    This popular training course runs the candidate through all of the relevant theoretical and practical aspects that are required to pass NPTC Units CS31 (202) and allows successful candidates to fell trees commercially up to 380mm in diameter. The first day is workshop-based, covering legislation, risk assessments, basic chainsaw maintenance, chain ID, sharpening and organising site safety.

    To book one of our courses we require a completed booking form, and a deposit to secure the place.  The balance of the course is due 1 week prior to the course start date.  Please complete the online enquiry form below to start this process or call the office for further information.

    Course Outline

    Course Title: 5-day Chainsaw maintenance, Cross-cutting and Felling & Processing Trees up to 380mm course + 1-day NPTC Assess 
    Start Date: Mon 10 August 2026
    End Date: Fri 14 August 2026
    Location: Kingswood Training Centre
    Places: 4
    Places Remaining: 4 places
    Assessment Date: Sat 15 August OR Monday 17 August
    Course Price inc. VAT: £1060 inc. NPTC Assessment

      Your Name (required)

      Company

      Email (required)

      Phone No.

      Address

      Postcode/Zip

      Comment

      Keep me up-to-date with news and offers from Kingswood Training Services

      captcha

      CS30/31 – 5-day Combined Chainsaw Maint, Cross Cutting and Felling up to 380mm course + Assess – 200726

      Written by Michele Holmes Fryett on . Posted in Chainsaw, Content, Course availability

      Mon 20 July – Fri 24 July 2026, Assessment date: TBC

      This popular training course runs the candidate through all of the relevant theoretical and practical aspects that are required to pass NPTC Units CS31 (202) and allows successful candidates to fell trees commercially up to 380mm in diameter. The first day is workshop-based, covering legislation, risk assessments, basic chainsaw maintenance, chain ID, sharpening and organising site safety.

      To book one of our courses we require a completed booking form, and a deposit to secure the place.  The balance of the course is due 1 week prior to the course start date.  Please complete the online enquiry form below to start this process or call the office for further information.

      Course Outline

      Course Title: 5-day Chainsaw maintenance, Cross-cutting and Felling & Processing Trees up to 380mm course + 1-day NPTC Assess 
      Start Date: Mon 20 July 2026
      End Date: Fri 24 July 2026
      Location: Kingswood Training Centre
      Places: 4
      Places Remaining: 4 places
      Assessment Date: TBC
      Course Price inc. VAT: £1060 inc NPTC Assessment

        Your Name (required)

        Company

        Email (required)

        Phone No.

        Address

        Postcode/Zip

        Comment

        Keep me up-to-date with news and offers from Kingswood Training Services

        captcha

        CS39 – Using a Chainsaw from a Rope and Harness – 090626

        Written by Michele Holmes Fryett on . Posted in Chainsaw, Climbing, Content, Course availability

        Tues 09 – Thurs 11 June 2026 – Assess Fri 12 June 2026

        Our 3-day training course, plus 1-day NPTC Assessment, covers specialist cutting techniques for using saws up trees. CS39 – NPTC Unit 204 – is accepted by the HSE as evidence of suitable training and competence for a professional arborist who operates chainsaws and performs aerial tree-work operations.

        Prerequisites:

        NPTC Units: 201:Chainsaw maintenance and cross-cutting (CS30)

        NPTC Unit 202: Tree felling and processing (CS31)

        NPTC Units: 203: Tree climbing and Aerial Rescue Operations (CS38)

        This course is for people who work as Tree surgeons, Arborists. The course provides the knowledge and skill requirements for candidates to be assessed for City & Guilds (NPTC) regulated qualification (QCF). The course lasts 3 consecutive days followed by a 1-day independent City & Guilds NPTC assessment. Candidates are taught in both a workshop and a local woodland environment.

        To book one of our courses we require a completed booking form, and a deposit to secure the place.  The balance of the course is due 1 week prior to the course start date.  Please complete the online enquiry form below to start this process or call the office for further information.

        Course Outline

        Course Title: Using a Chainsaw from a Rope and Harness – CS39 090626
        Start Date: Tues 09 June 2026
        End Date: Thurs 11 June 2026
        Location: Kingswood Training – Sevenoaks, Kent
        Places: 4
        Places Remaining: **LAST PLACE**
        Assessment Date: Fri 12 June 2026

        COURSE TOTAL:  £730.00 per candidate including VAT & NPTC registration

          Your Name (required)

          Company

          Email (required)

          Phone No.

          Address

          Postcode/Zip

          Comment

          Keep me up-to-date with news and offers from Kingswood Training Services

          captcha

          CS39 – Using a Chainsaw from a Rope and Harness – 070726

          Written by Michele Holmes Fryett on . Posted in Chainsaw, Climbing, Content, Course availability

          Tues 07 July – Thurs 09 July 2026 – Assess: Mon 13 July 2026

          Our 3-day training course, plus 1-day NPTC Assessment, covers specialist cutting techniques for using saws up trees. CS39 – NPTC Unit 204 – is accepted by the HSE as evidence of suitable training and competence for a professional arborist who operates chainsaws and performs aerial tree-work operations.

          Prerequisites:

          NPTC Units: 201:Chainsaw maintenance and cross-cutting (CS30)

          NPTC Unit 202: Tree felling and processing (CS31)

          NPTC Units: 203: Tree climbing and Aerial Rescue Operations (CS38)

          This course is for people who work as Tree surgeons, Arborists. The course provides the knowledge and skill requirements for candidates to be assessed for City & Guilds (NPTC) regulated qualification (QCF). The course lasts 3 consecutive days followed by a 1-day independent City & Guilds NPTC assessment. Candidates are taught in both a workshop and a local woodland environment.

          To book one of our courses we require a completed booking form, and a deposit to secure the place.  The balance of the course is due 1 week prior to the course start date.  Please complete the online enquiry form below to start this process or call the office for further information.

          Course Outline

          Course Title: Using a Chainsaw from a Rope and Harness – CS39 070726
          Start Date: Tues 7 July 2026
          End Date: Thurs 9 July 2026
          Location: Kingswood Training Centre – Sevenoaks, Kent
          Places: 4
          Places Remaining: 4 places
          Assessment Date: Mon 13 July  2026

          COURSE TOTAL:  £730.00 including VAT & NPTC registration.

            Your Name (required)

            Company

            Email (required)

            Phone No.

            Address

            Postcode/Zip

            Comment

            Keep me up-to-date with news and offers from Kingswood Training Services

            captcha

            CS30 – 2-day Chainsaw Maintenance and Cross-cutting course – 030826

            Written by Michele Holmes Fryett on . Posted in Chainsaw, Content, Course availability, Machinery

            Monday 03 – Tuesday 04 August 2026, Assessment date: TBC 

            This popular training course runs the candidate through all of the relevant theoretical and practical aspects that are required to pass NPTC Unit 0039-20 (201) –  The first day is workshop-based, covering legislation, risk assessments, basic chainsaw maintenance, chain ID, sharpening and organising site safety.  The second day is off-site in the woods cross-cutting.

            To book one of our courses we require a completed booking form, and a deposit to secure the place.  The balance of the course is due 1 week prior to the course start date.  Please complete the online enquiry form below to start this process or call the office for further information.

            Course Outline

            Course Title: 2-day Chainsaw Maintenance and Cross-cutting course + 1-day NPTC Assess – CS30 
            Start Date:  Monday 3 August 2026 
            End Date: Tuesday 4 August 2026

            Location: Kingswood Training Centre – Sevenoaks Kent
            Places: 4
            Places Remaining: 4 places
            Assessment Date: TBC
            Course Price inc. VAT: £530.00 inc. NPTC Assessment

              Your Name (required)

              Company

              Email (required)

              Phone No.

              Address

              Postcode/Zip

              Comment

              Keep me up-to-date with news and offers from Kingswood Training Services

              captcha

              CS30/31 – 5-day Combined Chainsaw Maint, Cross Cutting and Felling up to 380mm course + Assess – 150626

              Written by Michele Holmes Fryett on . Posted in Chainsaw, Content, Course availability

              Mon 14 – Fri 18 September 2026 – Assess – **TBC** Sat 19 Sept and Mon 21 September  2026

              This popular training course runs the candidate through all of the relevant theoretical and practical aspects that are required to pass NPTC Units CS31 (202) and allows successful candidates to fell trees commercially up to 380mm in diameter. The first day is workshop-based, covering legislation, risk assessments, basic chainsaw maintenance, chain ID, sharpening and organising site safety.

              To book one of our courses we require a completed booking form, and a deposit to secure the place.  The balance of the course is due 1 week prior to the course start date.  Please complete the online enquiry form below to start this process or call the office for further information.

              Course Outline

              Course Title: 5-day Chainsaw maintenance, Cross-cutting and Felling & Processing Trees up to 380mm course + 1-day NPTC Assess 
              Start Date: Mon 14 September 2026
              End Date: Fri 18 September 2026
              Location: Kingswood Training Centre
              Places: 4
              Places Remaining: 4 places
              Assessment Date:  **TBC: Sat 19 Sept or Mon 21 September 2026
              Course Price inc. VAT: £1060 inc NPTC Assessment

                Your Name (required)

                Company

                Email (required)

                Phone No.

                Address

                Postcode/Zip

                Comment

                Keep me up-to-date with news and offers from Kingswood Training Services

                captcha

                CS30/31 – 5-day Combined Chainsaw Maint, Cross Cutting and Felling up to 380mm course + Assess – 060726

                Written by Michele Holmes Fryett on . Posted in Chainsaw, Content, Course availability

                Mon 6 July – Fri 10 July 2026, Assess: TBC

                This popular training course runs the candidate through all of the relevant theoretical and practical aspects that are required to pass NPTC Units CS31 (202) and allows successful candidates to fell trees commercially up to 380mm in diameter. The first day is workshop-based, covering legislation, risk assessments, basic chainsaw maintenance, chain ID, sharpening and organising site safety.

                To book one of our courses we require a completed booking form, and a deposit to secure the place.  The balance of the course is due 1 week prior to the course start date.  Please complete the online enquiry form below to start this process or call the office for further information.

                Course Outline

                Course Title: 5-day Chainsaw maintenance, cross-cutting and Felling & Processing Trees up to 380mm course + 1-day NPTC Assess – 060726
                Start Date: Mon 6 July 2026
                End Date: Fri 10 July 2026
                Location: Kingswood Training Centre
                Places: 4
                Places Remaining: 4 Spaces 
                Assessment Date:  TBC
                Course Price inc. VAT: £700.00 + NPTC Assessment £360

                  Your Name (required)

                  Company

                  Email (required)

                  Phone No.

                  Address

                  Postcode/Zip

                  Comment

                  Keep me up-to-date with news and offers from Kingswood Training Services

                  captcha

                  CS31 – 4-day Felling up to 380mm course + Assess – 140726

                  Written by Michele Holmes Fryett on . Posted in Chainsaw, Content, Course availability, Machinery

                  Tues 14 July – Fri 17 July 2026, Assessment: Sat 18 July 2026

                  This popular training course runs the candidate through all of the relevant theoretical and practical aspects that are required to pass NPTC Unit 202/39-21 (CS31) and allows successful candidates to fell trees commercially up to 380mm in diameter. The morning of day 1 is workshop-based, covering legislation, risk assessments, basic chainsaw maintenance, the various felling cuts and organising site safety.

                  **The NPTC pre-requisite for the felling course is NPTC unit 0039-20 – Chainsaw Maint & Cross cutting (also known as CS30 or unit 201) 

                  To book one of our courses we require a completed booking form, and a deposit to secure the place.  The balance of the course is due 1 week prior to the course start date.  Please complete the online enquiry form below to start this process or call the office for further information.

                  Course Outline

                  Course Title: 4-day Felling & Processing Trees up to 380mm course + NPTC Assess – 140726
                  Start Date: Tues 14 July 2026
                  End Date: Fri 17 July 2026
                  Location: Kingswood Training Centre
                  Places: 4
                  Places Remaining: 4
                  Assessment Date:  Sat 18 July 2026
                  Course Price inc. VAT: £730.00 inc. NPTC Assessment

                    Your Name (required)

                    Company

                    Email (required)

                    Phone No.

                    Address

                    Postcode/Zip

                    Comment

                    Keep me up-to-date with news and offers from Kingswood Training Services

                    captcha

                    CS31 – 4-day Felling up to 380mm course + Assess – 180826

                    Written by Michele Holmes Fryett on . Posted in Chainsaw, Content, Course availability

                    Tuesday 18 Aug – Friday 21 Aug, Assessment: Saturday 22 August

                    This popular training course runs the candidate through all of the relevant theoretical and practical aspects that are required to pass NPTC Unit 202/39-21 (CS31) and allows successful candidates to fell trees commercially up to 380mm in diameter. The morning of day 1 is workshop-based, covering legislation, risk assessments, basic chainsaw maintenance, the various felling cuts and organising site safety.

                    **The NPTC pre-requisite for the felling course is NPTC unit 0039-20 – Chainsaw Maint & Cross cutting (also known as CS30 or unit 201) 

                    To book one of our courses we require a completed booking form, and a deposit to secure the place.  The balance of the course is due 1 week prior to the course start date.  Please complete the online enquiry form below to start this process or call the office for further information.

                    Course Outline

                    Course Title: 4-day Felling & Processing Trees up to 380mm course + NPTC Assess – 180826
                    Start Date: Tuesday 18 August 2026
                    End Date: Friday 21 August 2026
                    Location: Kingswood Training Centre
                    Places: 4
                    Places Remaining: 4 places
                    Assessment Date:  Saturday 22 August 2026
                    Course Price inc. VAT: £730 inc. NPTC Assessment

                      Your Name (required)

                      Company

                      Email (required)

                      Phone No.

                      Address

                      Postcode/Zip

                      Comment

                      Keep me up-to-date with news and offers from Kingswood Training Services

                      captcha

                      NPTC
                      Words Lantraawards2