CS30/31 – 5-day Combined Chainsaw Maint, Cross Cutting and Felling up to 380mm course + Assess – 200726

Written by Michele Holmes Fryett on 8th May 2026. Posted in Chainsaw, Content, Course availability

Mon 20 July – Fri 24 July 2026, Assessment date: Sat 25 July 2026

This popular training course runs the candidate through all of the relevant theoretical and practical aspects that are required to pass NPTC Units CS31 (202) and allows successful candidates to fell trees commercially up to 380mm in diameter. The first day is workshop-based, covering legislation, risk assessments, basic chainsaw maintenance, chain ID, sharpening and organising site safety.

To book one of our courses we require a completed booking form, and a deposit to secure the place.  The balance of the course is due 1 week prior to the course start date.  Please complete the online enquiry form below to start this process or call the office for further information.

Course Outline

Course Title: 5-day Chainsaw maintenance, Cross-cutting and Felling & Processing Trees up to 380mm course + 1-day NPTC Assess 
Start Date: Mon 20 July 2026
End Date: Fri 24 July 2026
Location: Kingswood Training Centre
Places: 4
Places Remaining: ***LAST PLACE***
Assessment Date: Sat 25 July 2026
Course Price inc. VAT: £1060 inc NPTC Assessment

• Continue Reading

CS30/31 – 5-day Combined Chainsaw Maint, Cross Cutting and Felling up to 380mm course + Assess – 150626

Written by Michele Holmes Fryett on 25th September 2025. Posted in Chainsaw, Content, Course availability

Mon 14 – Fri 18 September 2026 – Assess – **TBC** Sat 19 Sept and Mon 21 September  2026

This popular training course runs the candidate through all of the relevant theoretical and practical aspects that are required to pass NPTC Units CS31 (202) and allows successful candidates to fell trees commercially up to 380mm in diameter. The first day is workshop-based, covering legislation, risk assessments, basic chainsaw maintenance, chain ID, sharpening and organising site safety.

To book one of our courses we require a completed booking form, and a deposit to secure the place.  The balance of the course is due 1 week prior to the course start date.  Please complete the online enquiry form below to start this process or call the office for further information.

Course Outline

Course Title: 5-day Chainsaw maintenance, Cross-cutting and Felling & Processing Trees up to 380mm course + 1-day NPTC Assess 
Start Date: Mon 14 September 2026
End Date: Fri 18 September 2026
Location: Kingswood Training Centre
Places: 4
Places Remaining: 4 places
Assessment Date:  **TBC: Sat 19 Sept or Mon 21 September 2026
Course Price inc. VAT: £1060 inc NPTC Assessment

• Continue Reading

CS31 – 4-day Felling up to 380mm course + Assess – 140726

Written by Michele Holmes Fryett on 23rd January 2025. Posted in Chainsaw, Content, Course availability, Machinery

Tues 14 July – Fri 17 July 2026, Assessment: Sat 18 July 2026

This popular training course runs the candidate through all of the relevant theoretical and practical aspects that are required to pass NPTC Unit 202/39-21 (CS31) and allows successful candidates to fell trees commercially up to 380mm in diameter. The morning of day 1 is workshop-based, covering legislation, risk assessments, basic chainsaw maintenance, the various felling cuts and organising site safety.

**The NPTC pre-requisite for the felling course is NPTC unit 0039-20 – Chainsaw Maint & Cross cutting (also known as CS30 or unit 201) 

To book one of our courses we require a completed booking form, and a deposit to secure the place.  The balance of the course is due 1 week prior to the course start date.  Please complete the online enquiry form below to start this process or call the office for further information.

Course Outline

Course Title: 4-day Felling & Processing Trees up to 380mm course + NPTC Assess – 140726
Start Date: Tues 14 July 2026
End Date: Fri 17 July 2026
Location: Kingswood Training Centre
Places: 4
Places Remaining: ***LAST PLACE***
Assessment Date:  Sat 18 July 2026
Course Price inc. VAT: £730.00 inc. NPTC Assessment

• Continue Reading

CS31 – 4-day Felling up to 380mm course + Assess – 180826

Written by Michele Holmes Fryett on 17th January 2025. Posted in Chainsaw, Content, Course availability

Tuesday 18 Aug – Friday 21 Aug, Assessment: Saturday 22 August

This popular training course runs the candidate through all of the relevant theoretical and practical aspects that are required to pass NPTC Unit 202/39-21 (CS31) and allows successful candidates to fell trees commercially up to 380mm in diameter. The morning of day 1 is workshop-based, covering legislation, risk assessments, basic chainsaw maintenance, the various felling cuts and organising site safety.

**The NPTC pre-requisite for the felling course is NPTC unit 0039-20 – Chainsaw Maint & Cross cutting (also known as CS30 or unit 201) 

To book one of our courses we require a completed booking form, and a deposit to secure the place.  The balance of the course is due 1 week prior to the course start date.  Please complete the online enquiry form below to start this process or call the office for further information.

Course Outline

Course Title: 4-day Felling & Processing Trees up to 380mm course + NPTC Assess – 180826
Start Date: Tuesday 18 August 2026
End Date: Friday 21 August 2026
Location: Kingswood Training Centre
Places: 4
Places Remaining: 4 places
Assessment Date:  Saturday 22 August 2026
Course Price inc. VAT: £730 inc. NPTC Assessment

• Continue Reading